ONLY USING THE INSTRUCTION MANUAL AS A GUIDE
To use the Rose Toys, first unplug it from the power source and read the manual once more. Follow the directions precisely, step by step and point by point.
The application of the method is not exactly the same because the rose toy continuously iteratively improves and creates a large number of items. Some require a five second long press to turn on. For some people, turning it on may need a 10-second long press. Therefore, it would be ideal if you used the manual’s value as a reference.
When used, the LED light is always flashing.
When you use the Rose toy, you’ll notice that the LED light continues to blink for a short while before going off. You may use it more effectively if you restarted it.
Please be aware that the Rose Toy needs to be recharged because it is currently out of juice. You will notice an LED light blinking on the rose toy while it is charging.
IT MUST BE COMPLETELY CHARGED PRIOR TO USE
It is advised that you use the rose toy after a full charge the first time you have it. This will allow you to confirm that you can fully charge the rose toy properly and that it complies with the instructions.
The battery will not be activated by this complete charging. In the past, nickel-cadmium or nickel-hydrogen batteries were frequently utilized in electrical devices. You can lengthen the requirement for many complete charges and discharges within a specified battery life limit by using this battery memory effect.
However, lithium-ion batteries (also known as lithium polymer batteries) are often used in electronic gadgets nowadays. These batteries do not have a memory effect and can easily overcharge or overdischarge, although doing so will degrade the battery life. Therefore, it is not essential to perform this “activation” process on lithium-ion batteries.
Therefore, it would be preferable if you referred to the battery’s characteristics for appropriate use.
ARE YOU CHARGING ON A COMPUTER?
If you’re using a laptop or desktop computer such an iMac, MAC Book, HP PC, Microsoft PC, Lenovo, Dell, Acer, or another brand.
You must pay close attention to see if they go into sleep mode. For instance, laptops may go into sleep mode automatically after 10 minutes of inactivity. The USB port may not be powered while the device is in sleep mode, making it impossible to recharge the Rose Toys.
How can Rose Toys verify whether the computer is in standby mode?
Normally, when the rose toy is charging, the LED light will flash. After Rose Toys is fully charged, the light will always be on. If you use the computer to charge something and notice that the light starts off flickering and then goes out in less than 30 minutes, it’s possible that the computer’s USB port has ceased producing electricity.
USE A POWER BANK, DO YOU?
When choosing a Power Bank, use caution because some of them produce excessive voltage. Use a 5V USB port and not a 9V or any higher voltage interface. The default setting for Rose Toys without marked power requirements is to use a 5V USB connection.
USE A USB CAR CHARGER ADAPTER DO YOU?
If you utilize car charging, there are various kinds of chargers available. The USB car charging adaptor must be used. When using it, attention must be paid. You should select the output 5V interface since it will help.
Depending on the features of each vehicle, some have no USB power once the engine is shut off while others can still charge. Therefore, you should be aware of if this feature prevents you from charging the rose toy.
DO YOU CHARGER ADAPTER FOR CELLPHONES?
You must pay attention to the output voltage and output current of the cell phone adapter if you use one to charge the rose toy. The Rose Toys typically operate at 5V voltage and 2A current.
Make sure the cell phone adapter’s output is 5V and that the current, if it is higher or lower, is appropriate.
Do not charge the rose toy using a laptop adapter. For instance, the 20V offered by the MAC book laptop adapter The rose toy cannot handle a voltage of 20V.
LISTEN TO THE CURRENT OF DIFFERENT ADAPTERS
The current differs depending on whether you’re using a Power Bank, a car USB charging converter, or a phone charging adaptor. At least 1A is the minimum required output current. If it is significantly less than this amount, say only 0.5A, the Rose Toys may take too long to charge or may not fill up at all.
They typically have currents larger than 1A, however when their power supply is running low, their current output will decrease.
VERIFY THE ROSE TOY’S PARTS OF THE BODY
Verify the rose toy for any broken pieces and determine if it has water inside from being used underwater.
You can examine the rose toy by picking it up. There is water within if you notice water seeping out. Try again after letting it air dry or naturally dry this time.
The rose toy can be placed into a bag of rice, which is absorbent and will do a great job of soaking up the water inside the rose toy, if drying naturally does not solve the problem.
Do not use this rose toy underwater even if the repair makes the rose functional once again. It can’t be completely watertight because of a gap on the outside.
IS THE ROSE TOY’S TRAVEL LOCK’S SWITCH ON?
Please check to see if the travel lock on the rose toy is open if it has one. The travel lock prevents humiliation from occurring if the toy is mistakenly touched while being transported.
BATTERY, CABLE, AND ELECTROLYTE PROBLEMS
Please refer to this page, which discusses the charging head, battery, electrolyte leakage, magnetic charging head, poor contact issues, etc., if the aforementioned instructions do not resolve your issue.